NEC NEAX2400 IPX Programming Manual page 646

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

Service Conditions (cont'd)
10.
When a station tries to bridge into a call and presses the line appearance, and when PRIVACY RELEASE
is not available because of the lack of an 8-party conference trunk, the LCD displays as follows, indicating
that PRIVACY RELEASE is not available:
11.
PRIVACY RELEASE is not available when another station is in the process of entering a multiple-party
call (when receiving ringback tone). The station will not receive any tone, and the LCD displays:
12.
When the station engaged in communication with the overridden party is released in the process of
entering a multiple-party call, the other stations engaged in a call on the same line will not be released. In
this case, the last overriding station will be connected to an 8-party conference trunk, but after that,
EXECUTIVE RIGHT-OF-WAY [E-1] will not be available.
13.
The overriding party's LCD display after pressing the line appearance of a busy station is shown below:
OVERRIDING
PARTY'S
TERMINAL
STATUS
Idle
Call Waiting status
Busy
The called telephone number is displayed even when Privacy is set.
Note:
14.
PRIVACY RELEASE is available after any of the following operations is performed by the overriding
station:
a.) The user presses the line appearance of a busy station, goes off-hook or presses the SPEAKER
key.
b.) While connected to a station/Attendant/OG trunk/IC trunk, the user presses the line appearance of
a busy station. (The call in progress will be disconnected.)
c.) While engaged in THREE-WAY CALLING [T-2], the user presses the line appearance of a busy
station. The stations, except the one that has pressed the line appearance, will be in a 2-party
connection.
d.) The user presses the line appearance of a busy station while hearing dial tone, ringback tone, busy
tone, or reorder tone.
e.) While answering a VOICE CALL [V-2D], the user presses the line appearance of a busy station.
The call in progress will be disconnected.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Privacy Release
CONF REST
(Time Display)
CONF REST
(Time Display)
OVERRIDING PARTY'S LINE STATUS
PRIVACY
RELEASE
AVAILABLE
Conference Trunk Blocked
CONF
After disconnecting the
busy station, CONF REST
CONF
is displayed and the status
will be Call Waiting
PRIVACY RELEASE NOT AVAILABLE
Not Engaged In Two-party Call
-
-
P-18
CONF REST
CONF RST
CONF REST
Page 603

Advertisement

Table of Contents
loading

Table of Contents