Table of Contents
Advertisement
T-18D
General Description
This feature provides a digital time display on a D
Operating Procedure
No manual operation is required.
Service Conditions
1.
The time is displayed according to the clock in the PBX and is set via the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18].
2.
Time is displayed automatically:
3.
Time is constantly displayed on the center line of the LCD.
4.
The time will not be displayed when a D
INDICATION -D
5.
While NAME DISPLAY - SYSTEM [N-28], NAME DISPLAY - SYSTEM - CCIS [N-37], or NAME
DISPLAY WITHOUT - OAI - CCIS [N-37] 16-digit display is activated on the D
display, the time is not displayed. When both the calling/called station are released from a station-to-
station call, the LCD of the calling/called station returns to the TIME DISPLAY.
Interactions
term
1.
Only the D
2.
The calendar and time must be set via ATIM command.
Programming
STEP 1:
ATIMN - Assignment of time data command for the FCCS network.
STEP 2:
ATIM - Assignment of time data command must be used to provide the system with the date and time.
STEP 3:
ASDT - The D
Telephone Equipment Class (TEC) of 12.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Time Display - D
Time Display - D
12:48
term
[M-85D] and MW/VMM is displayed.
with display has the TIME DISPLAY feature capability.
term
itself must be assigned. Assign to an LEN served by an 8DLC or 16ELC, with a
term
term
's LCD.
PM
WED
27
term
station is set for a second line MESSAGE WAITING
term
term
with 2-line LCD
T-18D
Page 767
Advertisement
Table of Contents
