Table of Contents
Advertisement
E-3D
General Description
This feature provides an LCD display of the time elapsed while a D
Operating Procedure
No manual operation is required.
Service Conditions
1.
The ELAPSED TIME is displayed in the eight left-side positions of the LCD display.
2.
The ELAPSED TIME can reach a maximum of 9 hours, 59 minutes and 59 seconds. After that time, the
clock returns to zero.
3.
A continuous time display will occur during CONSULTATION HOLD - ALL CALLS [C-17] and
THREE-WAY CALLING [T-2].
4.
When a call is transferred, the time display of the party receiving the transfer begins from zero.
5.
The elapsed time is not displayed when the station is in a specific condition such as:
a.) THREE-WAY CALLING [T-2]
b.) connected to a trunk with held trunk, as in the case of CONSULTATION HOLD [C-17].
Programming
No programming is required.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Elapsed Time Display - D
Elapsed Time Display - D
term
term
term
is connected to any trunk.
E-3D
Page 339
Advertisement
Table of Contents
