NEC NEAX2400 IPX Programming Manual page 169

C-3D
Service Conditions (cont'd)
7. CALL FORWARDING - DON'T ANSWER - D
CALLING - ONE TOUCH - D
via the dial pad.
8. CALL FORWARDING - DON'T ANSWER - D
CALLS [C-17], and CALL TRANSFER - ALL CALLS [C-11].
9. A user may set CALL FORWARDING - DON'T ANSWER - D
the CLASS OF SERVICE - INDIVIDUAL [C-15] as assigned to the station (MY Line) setting the service.
The figure below is a simplified key sheet assignment for stations 200 & 201. The CLASS OF SERVICE
- INDIVIDUAL [C-15] for station 200 is allowed CALL FORWARDING - DON'T ANSWER - D
but the CLASS OF SERVICE - INDIVIDUAL [C-15] for station 201 is not. Station 200 is able to set
CALL FORWARDING - DON'T ANSWER - D
on station 201 will illuminate.
FORWARD-NA
FORWARD-NA key is same as the CALL FORWARDING - DON'T ANSWER feature key.
Note:
Even when a sub-line of D
Line of that D
10. This feature is applicable to CALL FORWARDING - ALL CALLS - OUTSIDE [C-28], CALL
FORWARDING - DON'T ANSWER - CCIS [C-47], and MULTIPLE CALL FORWARDING -DON'T
ANSWER - CCIS [M-42].
11. The display of an intermediate station on a D
system data. This arrangement is done on a system basis. The LCD displays:
When the telephone number of the intermediate or calling/called station exceeds 8 digits, the last 8 digits
Note:
are displayed. However, a maximum of 16 digits calling/called telephone number can be displayed on the
middle line of LCD depending on the system data.
Page 126
Call Forwarding - Don't Answer - D
term
[S-26D]. If this feature is accessed via the dial pad, it must be cancelled
Station 200
MY LINE
term
is assigned as the destination station, the call is not forwarded if the MY
term
is not allowed CALL FORWARDING - DON'T ANSWER - D
Intermediate Station
CF NANS XXXX
(Time Display)
term
may also be accessed via the dial pad or SPEED
term
is not applicable to CONSULTATION HOLD - ALL
term
for station 201. The associated feature button LED
FORWARD-NA
MULTI-LINE
term
's LCD panel may be allowed or denied according to
Calling/Called Station
XXXX
term
term
for a multi-line appearance based on
Station 201
MY LINE
term
.
:
NEAX2400 IPX Feature Programming Manual
term
,
MULTI-LINE
NDA-24297, Issue 1