Table of Contents
Advertisement
Programming (cont'd)
STEP 3:
ASPA - Assign an access code to CALL FORWARDING-BUSY LINE - CCIS entry, SID = 10 and to
CALL FORWARDING-BUSY LINE - CCIS cancel SID = 11. Assign Connection Status Index (CI)
for Normal (N) service.
STEP 4:
ASFC - Assign a Service Feature Class that allows SFI = 9 to the stations receiving CALL
FORWARDING-BUSY LINE - CCIS.
STEP 5:
AKYD - For D
programmable line/feature key. Assign Type:Function:CALL FORWARDING-BUSY LINE [1].
STEP 6:
ADSL - Assign FDB key; Assign SN=1 (Originating; DT Connection) and FKY=1 (Call Forwarding -
Busy Line).
This command is used for assigning a function to each soft key.
STEP 7:
ATNR - Allow tenant-to-tenant connection for Inter and Intra-tenant connections. Assign Tenant
Restriction Index (TRI) = 1. For this feature to be set by the Attendant Console, assign Inter and Intra-
Tenant connection via the Attendant Console, TRI = 3. This allows a phone in one tenant to be
forwarded to a phone in the same or different tenant.
STEP 8:
ACFO - For tenant-wide CALL FORWARDING-BUSY LINE - CCIS of an incoming DID and DIT
calls, assign CF = 1 for a destination (CFI) of either the Attendant Console or a station.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Forwarding - Busy Line - CCIS
term
sets, CALL FORWARDING-BUSY LINE - CCIS may be assigned to a
C-46
Page 839
Advertisement
Table of Contents
