Table of Contents
Advertisement
Service Conditions (cont'd)
c.) when the number of available Attendants exceeds the number of incoming calls, the status of
attendant console will be one of the following:
(1) The Attendant will be released from the current call and will be connected to the next incoming
call.
(2) The Attendant will be released from the current call and attendant consoles will be idle.
(3) No change.
4.
AUTOMATIC RECALL [A-8] is available for a call held by the Attendant.
Programming
ASYD - System 1, Index 246, Bit 0: Answer Hold - Attendant from a two-party connection. 0/1 = Out/
In Service
System 1, Index 246, Bit 1: Answer Hold - Attendant from a three-way connection. 0/1 = Out/In
Service
Assign the data of the Attendant Console by referring to the Assignment Procedure of [A-3]
ATTENDANT CONSOLE.
FCCS Programming
No unique programming is required for the FCCS network.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Answer Hold - Attendant
A-98
Page 63
Advertisement
Table of Contents
