Installation Of Cooling Fan Harness Axis 1 And 2; Locations In Dual Cabinet Controller - ABB IRC5 Product Manual

2.9.9. Installation of cooling fan harness axis 1 and 2

General
If the robot is going to be supplemented with cooling fans on axis 1 and 2 the controller has
to be supplemented with a internal harness.

Locations in Dual Cabinet Controller

xx0600002685
A
B
C
D
E
3HAC021313-001 Revision: K
2 Installation and Commissioning, IRC5
2.9.9. Installation of cooling fan harness axis 1 and 2
Harness, cooling - Axis 1 and 2
Cover with cable gland
Contactor interface board
Connector A43.X10
Connector A43.X11
Continues on next page
139