Procedure Hard Disk Drive - How To Install The Extra Mass Memory - ABB IRC5 Product Manual

2 Installation and Commissioning, IRC5
2.9.6. Installation of extra mass memory in computer unit DSQC623
Continued
Procedure Hard disk drive
The procedure below details how to install the extra mass memory.
120
Action
1.
DANGER!
Before any work inside the cabinet, please
observe the safety information in section
DANGER - Make sure that the main power
has been switched off! on page
2.
esd
WARNING!
The unit is sensitive to ESD, before
handling the unit please observe the safety
information in section WARNING - The unit
is sensitive to ESD! on page 29
3. Remove the computer unit.
4. Open the computer unit
5. Unscrew the cage attachment screws for
the drive cages, and pull the cage out.
6. Disconnect the flat ribbon cable from the
hard disk drive memory.
Info/Illustration
28.
Detailed in section
computer unit DSQC623 on page
Detailed in section
motherboard in computer unit DSQC623
on page 230.
Detailed in section
motherboard in computer unit DSQC623
on page 230.
xx0400000941
• A: Hard disk drive
• B: Flat ribbon cable connection, 40
pin
3HAC021313-001 Revision: K
Replacement of
222.
Replacement of
Replacement of
Continues on next page