Takeoff Data - Honeywell FMZ Series Pilot's Manual

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

TAKEOFF DATA

Takeoff data is entered by selecting TAKEOFF on the PERF INDEX
page. Takeoff is completed using two pages.
TAKEOFF 1/2 -- The following is displayed on the TAKEOFF 1/2,
D
shown in Figure 4--29:
— Runway or helipad number and International Civil Aviation
Organization (ICAO) identifier (1L)
— Runway heading when a runway is selected (1L)
— Runway length or helipad dimensions (1R)
— Temperature (2L)
— Surface wind (2R)
— Pressure altitude (3L)
— BARO (barometric) setting (3L)
— Surface elevation (3R).
Surface information is retrieved from the database. Temperature is
sensed or entered. Barometric setting (BARO set) is obtained from
the display controllers as entered by the pilots (small font) or is
entered manually (large font). Surface wind is a required entry and
is normally the only entry made on the TAKEOFF 1/2 page.
Operational Example
4-28
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 4- -29
TAKEOFF 1/2
A28- - 1146- - 181
REV 3 Mar 2009