Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
— 1R -- When the surface is a runway:
LENGTH is displayed in small white font. The content of this
D
data field is displayed in small green font.
For runways, the numerical length of the runway from the
database is displayed in feet. When no runway has been
selected, an entry is made a 1L, or a different length is
desired. The pilot can enter a runway length on this line.
Entering *DELETE* returns the default length or prompts.
When the surface is a helipad:
DIMENSIONS is displayed in small white font. Dimensions
D
are displayed in length and width format or diameter as
provided by the database. When a helipad dimension is
displayed in length and width format, the length and width is
displayed separated by an X. When a dimension is displayed
in diameter format, the value is followed by DIA and is
separated by a space. When the selected surface is a
helipad, the pilot entries are inhibited.
— 2L -- The outside air temperature is displayed in this field. An
entry is made in degrees Celsius or degrees Fahrenheit, but not
both. The celsius temperature is displayed in the scratchpad by
pushing 2L. Entering *DELETE* removes the temperature and
displays prompts. When temperature compensation is active,
the temperature compensation is canceled and the message
TEMP COMP CANCELED is displayed in the scratchpad under
the following conditions:
When the temperature is deleted or
D
When the entered temperature is out of range for the
D
temperature compensation mode.
NOTE:
— 2R -- The surface wind is entered here. Surface wind is entered
as magnetic wind. The default is entry prompts. Entering
*DELETE* returns to the default.
— 3L -- The pressure altitude and the baro setting are displayed on
this line in small characters except when entered by the pilot. The
pressure altitude is displayed in the following priority order:
Pilot--entered value (large characters)
D
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
The temperature compensation is activated by
selecting ACTIVATE on the TEMP COMP page.
Performance
5-33
Advertisement
Table of Contents
