Honeywell FMZ Series Pilot's Manual page 465

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Entry
Place/Bearing/Place/
Bearing/Altitude
Constraint
(P/B/P/B/ALT)
Place//Distance
(P//D)
Place//Distance/
Altitude Constraint
(P//D/ALT)
Pounds
(CONVERSION
page format)
Procedure Turn
Outbound Dist
Procedure Turn
Outbound Time
Procedure Turn Out
Angle
Pseudo--Random
Noise (PRN)
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 10- -1 (cont)
MCDU Entry Format
Similar to P/B/P/B, but with the
D
addition of an Altitude constraint
The altitude constraint entry format is
D
identical to the Altitude entry format
defined on page 10-2.
Place is any defined waypoint name
D
Distance entry minimum is one digit
D
Distance range is from 0 to 9999.9 NM
D
in 0.1 increments (decimal required for
tenths).
Similar to P//D, but with the addition of
D
an altitude constraint
The altitude constraint entry format is
D
identical to the Altitude entry format
defined on page 10-2.
Entry range is from 0 to 999,999.9 LB
D
in 0.1 increments (decimal required for
tenths)
A decimal is not required when tenths
D
position is zero.
The minimum entry is one digit
D
Range is 0.1 to Boundary Dist -- 4 NM
D
in 0.1 increments.
The minimum entry is one digit
D
Range is 0.1 to (Boundary Dist -- 4
D
NM)/ground speed in 0.1 increments.
The turn out angle is prefixed with the
D
turn out direction L or R
The turn out angle range is 20 to 90
D
degrees in 1 increments.
Entry is one or two digits
D
Range is from 1 to 32.
D
Multifunction Control Display Unit (MCDU) Entry Format
Format
10-13