Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Recall a Previously Stored Flight Plan
When the name of a previously stored flight plan is known, the name
is entered at 3R next to RECALL OR CREATE FPL NAMED, as shown
in Figure 7--1. After entering, the FMS automatically recalls the flight
plan and makes the stored flight plan the active flight plan, as shown in
Figure 7--2. The FMS takes 2 or 3 seconds to complete the recall of the
flight plan.
01676.01
Figure 7- -2
Recall Flight Plan
When the name of a previously stored flight plan cannot be
remembered, enter the origin and destination. The FMS searches the
stored flight plans for those plans with the same origin and destination.
When a stored flight plan is found, the FLIGHT PLAN LIST page is
displayed with the stored flight plan names marked with an asterisk (*),
as shown in Figure 7--3. The flight plan is selected by pushing the line
select key next to the desired stored flight plan, as shown in Figure 7--4,
and pushing RETURN (1R). The flight plan is activated and the ACTIVE
FLT PLAN pages, shown in Figure 7--2, are displayed. Even when the
flight plan name is remembered, this procedure saves steps over
entering the flight plan name at 3R.
A28- - 1146- - 181
Flight Plan
REV 3 Mar 2009
7-11
Honeywell International Inc. Do not copy without express permission of Honeywell.
Advertisement
Table of Contents
