Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
PATTERNS
Patterns are selected for both the active and stored flight plans. For
active flight plans only, the PATTERN prompt at 6L is displayed when
selecting the DIR key. For stored flight plans, the prompt at 6L is always
PATTERN. The procedures for selecting and defining all patterns are
similar. In addition to the pilot--defined patterns, some procedures, such
as approach procedures, contain patterns. These database patterns
are added to the flight plan when activating the approach procedure.
Pattern Definition
Figure 6--83 shows each pattern type except the search patterns.
Procedures for using each pattern type are contained in this guide. The
following patterns are available in the FMS:
HOLD (page 6-108)
D
PROCEDURE TURN (page 6-121)
D
FLYOVER (page 6-127)
D
ORBIT (page 6-128)
D
RADIAL (page 6-131)
D
SUSPEND (page 6-134)
D
SEARCH (page 6-142).
D
The ORBIT and RADIAL pattern prompts are displayed when SPECIAL
MISSION is turned ON. See setting special mission under Flight
Configuration for details.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Navigation
6-105
Advertisement
Table of Contents
