Honeywell FMZ Series Pilot's Manual page 480

Flight management system fms for the agusta aw139/ab139 helicopter software version nz 7.1
Table of Contents

Advertisement

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Message
LAST LEG
LIST FULL
MULTI FMS LOAD
UNAVAIL
NO CRS TO ARC
INTERCEPT
NO CROSSING
POINT FOUND
NO DISK
INSTALLED
NO FLIGHT PLAN
NO INPUT
ALLOWED
NO POSITION
SENSORS
NO PRESENT
POSITION
NO REQUIRED
SENSORS
NOT ALLOWED IN
AUTO LOAD
Messages
11-10
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 11- -1 (cont)
FMS Messages
Type
ALERTING
The active leg is the last leg
of the flight plan and the TO
waypoint is not the
destination.
ADVISORY Entry into a list is not
permitted because the list is
full.
ADVISORY Loading the navigational
database to all FMSs is not
possible.
ADVISORY No intercept to the arc is
found for the input definition.
ADVISORY No crossing points are found
for the CROSSING POINTS
page.
ADVISORY No disk is installed in the
data loader.
ADVISORY Origin or origin/destination is
entered on the FLIGHT
PLAN LIST page and there
is no flight plan with the
same origin or
origin/destination.
ADVISORY No input is allowed.
ALERTING
The DR light is turned on.
ADVISORY An action is requested that
requires present position.
ALERTING
The DEGRAD light is turned
on.
ADVISORY An entry to the active flight
plan has been made to the
FMS operating in SINGLE
and Auto load in a triple
FMS installation.
Definition
A28- - 1146- - 181
REV 3 Mar 2009

Advertisement

Table of Contents
loading

Table of Contents