Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step
Procedure 6- -34 Flight Configuration Setup
5
Set origin/destination display (ORG/DEST DISPLAY) to
ON or OFF at 3R. The default for this setting is OFF. This
option applies to how flight origins and destinations are
displayed on EFIS.
NOTE:
DETAILS
ORG/DEST DISPLAY ON -- The FMS lists the closest
D
airports for display on EFIS. When the option is selected
ON, the origin and destination airports are included in
the list even when not among the closest airports. The
origin and destination airports are also displayed as
runway symbols on modified EFIS with the ORG/DEST
DISPLAY ON option.
ORG/DEST DISPLAY OFF -- When the selection is
D
OFF, the origin and destination airports are included only
when among the closest airports. The origin and
destination airports are displayed as normal waypoint
symbols.
6
Set SPECIAL MISSIONS to ON or OFF at 4R. The FMS
contains special mission patterns. This selection makes
those additional patterns available. The default setting is
OFF.
DETAILS
SPECIAL MISSIONS ON -- All patterns in the FMS
D
(HOLD, PROCEDURE TURN, FLYOVER, ORBIT,
RADIAL) are available for use.
SPECIAL MISSIONS OFF -- Only standard patterns
D
(HOLDING, PROCEDURE TURN, FLYOVER) are
available for use.
7
Push NEXT to select page 2.
Navigation
6-188
Honeywell International Inc. Do not copy without express permission of Honeywell.
Do NOT set ORG/DEST DISPLAY to ON unless the installed
EFIS has been modified to support this feature. When
attempted, the origin and destination waypoint
symbols/identifiers are not displayed on EFIS.
A28- - 1146- - 181
REV 3 Mar 2009
Advertisement
Table of Contents
