Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step
Procedure 7- -2 FMS Temperature Compensation
6
(cont)
7
Select 1L to switch OFF temperature compensation
D
mode.
Select 2L to set temperature compensation mode to
D
COLD.
Select 3L to set the temperature compensation mode to
D
HOT & COLD.
NOTE:
The VNAV approach temperature compensation functionality
can, as an option, be enabled as COLD only or HOT & COLD.
When enabled as COLD, the previously discussed
procedures remain the same with the exception that the HOT
& COLD prompt is not available.
The FMS determines the compensated altitude constraint values
automatically once an outside air temperature value has been entered
on the LANDING page and an arrival has been strung into the active
flight plan.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Configuration
Figure 7- -13
TEMP COMP CONFIG 1/1 Page
01872.04
Flight Plan
7-33
Advertisement
Table of Contents
