Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Suspend
The FMS gives a means to suspend the active flight plan at the present
position or at the downpath waypoint. While the flight plan is
suspended, the FMS does not sequence waypoints or give steering
commands to the flight director. The FMS creates a PPOS waypoint in
the active flight plan by storing the location where the flight plan was
suspended as the SUSXX waypoint and inserting this waypoint in the
flight director prior to the current TO waypoint. Resuming the flight plan
while suspended can result in a direct--to leg to the SUSXX waypoint
or in a resume prompt selection from the ACTIVE FLT PLAN page. The
flight plan is also resumed by initiation of a direct--to to the pilot--entered
waypoint or to any waypoint on the active flight plan.
DEFINING WAYPOINT SUSPEND
A flight plan waypoint SUSPEND is defined and reviewed by following
Procedure 6--24.
Step
Procedure 6- -24 Flight Plan Suspend Definition and
1
Push the DIR key.
2
Select the PATTERN prompt at 6L. As an alternative,
PATTERNS are selected from the NAV INDEX (page 1).
3
Select the SUSPEND prompt at 4L. This action places
*SUSPEND* into the scratchpad.
Navigation
6-134
Honeywell International Inc. Do not copy without express permission of Honeywell.
Review
Figure 6- -106
PATTERNS 1/1 Page
A28- - 1146- - 181
REV 3 Mar 2009
Advertisement
Table of Contents
