Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
NOTICE TO AIRMEN
The pilot prevents the FMS from using a particular VOR and/or DME
station for position computations by using the NOTAM page. Stations
are entered as temporary or permanent. Entries in the temporary
column (up to 3) are deleted after the FMS is powered down (on
completion of the flight). Entries in the permanent column (up to 3) are
stored in FMS memory until removed by pilot action.
Procedure 6--10 explains how to enter and delete entries from the
NOTAM page.
Step
Procedure 6- -10 NOTAM Entries
1
Select POS SENSORS from NAV INDEX page 1. Select
VOR/DME (6L) and then NOTAM (6R).
2
Enter the navaid identifier into the scratchpad. Push a line
select key under either the permanent or temporary
column, as shown in Figure 6--69.
3
Delete an entry by pushing the DEL key. *DELETE* is
displayed in the scratchpad. Then push the line select key
adjacent to the navaid identifier. An entry is permitted to be
replaced with another navaid without first being deleted.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 6- -69
PERMANENT/TEMPORARY
00733.04
Navigation
6-85
Advertisement
Table of Contents
