Honeywell FMZ Series Pilot's Manual page 460

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Entry
Knots
(CONVERSION
page format)
Latitude
Latitude/Longitude
Latitude/Longitude/
Altitude Constraint
Liters
(CONVERSION
page format)
Multifunction Control Display Unit (MCDU) Entry Format
10-8
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 10- -1 (cont)
MCDU Entry Format
Entry range is from 0 to 999.9 KTS in
D
0.1 increments (decimal required for
tenths)
A decimal is not required when tenths
D
position is zero.
The first character must be N or S
D
Degrees range from 0 to 90
D
Minutes range is from 0.0 to 59.99 in
D
0.01 increments
Example of entries:
D
Entry
N0
N1
N12
N123
N1234
N1234.5
N1234.56
Entry of both latitude and longitude is
made by combining the latitude and
longitude entry with no space between
(Example: N50W50).
Similar to Latitude/Longitude, but with
D
the addition of an altitude constraint
The altitude constraint entry format is
D
identical to the Altitude entry format
defined on page 10-2.
Entry range is from 0 to 999,999.9 L in
D
0.1 increments (decimal required for
tenths)
A decimal is not required when tenths
D
position is zero.
Format
Display
N0000.00
N0100.00
N1200.00
N1230.00
N1234.00
N1234.50
N1234.56.
A28- - 1146- - 181
REV 3 Mar 2009