Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Message
PREV NOT
ALLOWED
RADIALS DO NOT
INTERSECT
RAIM WILL EXCEED
LIMIT
REGIONAL NDB
ONLY
RESET ALT SEL?
RUNWAY NOT
FOUND
S.E. PERF UNAVAIL
SINGLE/
INDEPENDENT
REQD
SINGLE
OPERATION
SLAVE FP CHNG
OVERRIDDEN
Messages
11-12
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 11- -1 (cont)
FMS Messages
Type
ADVISORY Selection of the previous
page is not allowed.
ADVISORY The radials defined for the
intercept function do not
cross.
ALERTING
RAIM at the time requested,
exceeds the limit for the
phase of flight.
ADVISORY Loading a world wide
navigation database was
attempted on an FMS that
accepts a regional NDB only.
ALERTING
The FMS is commanding a
change of altitude but the
altitude selector has not
been reset. The aircraft
cannot change altitude until
the selector has been reset.
ADVISORY The database does not
contain the entered runway
at the designated airport.
ALERTING
Indicates single engine
performance is not available.
ADVISORY The operating mode needs
to be single or independent
before accessing the CLEAR
CDB page.
ALERTING
There is a problem between
the two FMSs that precludes
full communication between
the two systems.
ADVISORY A change made on the slave
side could not be accepted
because of a conflict. The
change was overridden by
the master FMS.
Definition
A28- - 1146- - 181
REV 3 Mar 2009
Advertisement
Table of Contents
