Honeywell FMZ Series Pilot's Manual page 348

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step Procedure 6- -34 Flight Configuration Setup
10 The FLIGHT SUMMARY output selection is displayed at
3L. The FLIGHT SUMMARY output gives the display
and/or saving of the FLIGHT SUMMARY data following
completion of the flight. The FLIGHT SUMMARY OUTPUT
page, shown in Figure 6--141, is displayed by pushing the
OR prompt at 3R.
11 DETAILS
MCDU -- When selected ON, the FLIGHT SUMMARY page
D
is automatically displayed 15 seconds following landing.
PRINTER (Option) -- When selected ON, the PRINT
D
prompt is displayed on the FLIGHT SUMMARY page at
6L. The default configuration is OFF for PRINTER and
must remain OFF unless a printer is installed on the
aircraft.
STORAGE -- When selected on, the SAVE prompt is
D
displayed on the FLIGHT SUMMARY page at 6L.
FLTSUM STORAGE DEVICE -- When a data
D
management unit (DMU) is installed, the name of the
flight summary storage device is the last pilot selected
storage device or PCMCIA 2. When no DMU is installed,
LAN is the storage device.
Navigation
6-190
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 6- -141
FLIGHT SUMMARY OUTPUT 1/1 Page
A28- - 1146- - 181
REV 3 Mar 2009