Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Landing Pages
Database information about the arrival surface, when one is
D
selected, is displayed on the LANDING 1/2 page, shown in
Figure 5--18.
— 1L -- When the surface is a runway:
The selected surface identifier is displayed. The runway
D
heading is displayed for runway in the navigation database.
When no runway is selected in the flight plan, or a different
runway is desired, entry of the runway number or runway
heading is made on this line.
PIlot entries are displayed in magnetic heading. For example,
an entry of 29 is displayed as 290_. No airport is displayed
when a runway number is entered. Entering *DELETE*
returns the flight plan runway or prompts. The runway
heading is used to resolve the surface winds. Entry of a new
runway (heading, number, or new runway in the flight plan)
deletes the runway length, elevation, slope, stopway, and
threshold. The runway heading is displayed in the scratchpad
by pushing 1L
When the surface is a helipad:
The selected surface identifier is displayed. The helipad
D
identifier is displayed for helipads in the navigation database.
Performance
5-32
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 5- -18
LANDING 1/2 Page
A28- - 1146- - 181
REV 3 Mar 2009
Advertisement
Table of Contents
