Honeywell FMZ Series Pilot's Manual page 472

Flight management system fms for the agusta aw139/ab139 helicopter software version nz 7.1
Table of Contents

Advertisement

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Message
ALREADY EXISTS
ATC NOT
AVAILABLE
ATT/HDG 1 FAILED
ATT/HDG 2 FAILED
APPROACH CLIMB
LIMITED
BACK COMPLETE
BRG/CRS MUST BE
IN TRUE
BUSY--REENTER
LAST CHG
CAPTURE DISK IS
FULL
CHECK ALT
CONSTRAINT
Messages
11-2
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 11- -1 (cont)
FMS Messages
Type
ADVISORY A duplicate entry has been
entered into a list and is not
permitted.
ADVISORY Air Traffic Services (ATS)
Future Air Navigation
System (FANS) Datalink is
not configured on the
aircraft.
ALERTING
The FMS is no longer
receiving heading and
attitude data for the
identified unit.
ALERTING
The message is displayed
when the landing
calculations are approach
climb limited.
ADVISORY The message indicates you
have returned as far back as
possible.
ALERTING
The bearing entry must be in
true (entered xxxT) because
the reference waypoint is
outside the coverage of the
magnetic variation table.
ADVISORY A change to the custom
database was attempted
when the cross--side had
locked the custom database
for a change the cross--side
is making.
ADVISORY The disk in the data loader is
full.
ALERTING
The pilot must check
constraints for a conflict
between type of constraints
(CLB or DES) and current
flight mode (climbing or
descending).
Definition
A28- - 1146- - 181
REV 3 Mar 2009

Advertisement

Table of Contents
loading

Table of Contents