Honeywell FMZ Series Pilot's Manual page 407

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step Procedure 7- -4 Remove Temperature Compensation
4
(cont)
The TEMP COMP review page is accessed either through LANDING
page or from the FLIGHT PLAN pages. For the TEMP COMP access
prompt to be available on the flight plan pages, the following conditions
must be met:
The active TEMP COMP CONFIG mode is COLD or HOT & COLD
D
The aircraft is within 30 NM of the destination
D
An approach has been activated
D
Valid OAT (on the LANDING page) is entered.
D
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 7- -21
Accessing TEMP COMP
Flight Plan
7-41