Manual - Honeywell FMZ Series Pilot's Manual

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
To remove a waypoint speed constraint, follow Procedure 7--6.
Step Procedure 7- -6 Removing a Waypoint Speed
1 Push the DEL key.
2 Push the right line select key adjacent to the lateral
waypoint on the ACTIVE FLT PLAN page.

Manual

The pilot selects manual speed control from the guidance control panel.
In this mode, FMS uses the manually entered speed to the manually
entered speed. The active flight plan page shows the manually entered
speed in line 1R, as shown in Figure 7--31. Manual speed command
mode is not available on all aircraft types.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Constraint
Figure 7- -31
Manually Entered Speed
01683.02
Flight Plan
7-53