Crossing Radial - Honeywell FMZ Series Pilot's Manual

Flight management system fms for the agusta aw139/ab139 helicopter software version nz 7.1
Table of Contents

Advertisement

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

Crossing Radial

When the CROSS RADIAL prompt (2L), as shown in Figure 6--146, is
pushed the FMS computes the point along the flight plan where the
aircraft crosses the designated radial. The waypoint is entered at 1L
and the radial is entered at 1R, as shown in Figure 6--149. For example,
entering the 180_ radial, the FMS projects the aircraft can cross the
180_ radial 117 NM from DEN. The crossing radial definition at 2L is
inserted as a temporary waypoint.
00804.03
Figure 6- -149
CROSS RADIAL 1/1 Page
When the entered radial does not cross the flight plan, the message NO
CROSSING POINT FOUND is displayed in the scratchpad.
A28- - 1146- - 181
Navigation
REV 3 Mar 2009
6-199
Honeywell International Inc. Do not copy without express permission of Honeywell.

Advertisement

Table of Contents
loading

Table of Contents