Honeywell FMZ Series Pilot's Manual page 205

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step Procedure 6- -7 Arrival Selection
2
(cont)
DETAILS -- Figure 6--39 is displayed when the ARRIVAL
function is selected. From this page, the pilot chooses
which element, arrival surface, approach, or STAR is to be
selected. This page is also accessed from the ACTIVE
FLT PLAN page when the aircraft is within 200 flight plan
miles of the destination.
The default airport at 1R is the destination of the active
flight plan. When the destination is not defined, or when
the destination is not an airport/heliport, prompts are
displayed to enter the airport/heliport. Previous selections
are displayed on this page. Selections are also deleted on
this page.
The surface, approach or STAR is selected (or reselected)
in any order. In each case, the ARRIVAL prompt is
displayed in reverse video. The ARRIVAL prompt is used
to return to the ARRIVAL.
When an approach is to be selected, a step is saved by
selecting APPROACH from this page. The surface is
automatically selected when an approach is selected.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 6- -39
ARRIVAL 1/1 Page
01693.02
Navigation
6-47