Honeywell FMZ Series Pilot's Manual page 165

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step Procedure 6- -1 Stored Flight Plans
4 The FMS places KPHX as the origin and KMSP as the
destination, as shown in Figure 6--6.
DETAILS -- When the flight plan name is specified as the
origin and destination 4--letter International Civil Aviation
Organization (ICAO) airport identifier separated by a dash
(--), the FMS automatically fills in the origin and
destination. A single alphanumeric character is added
following the destination identifier to distinguish multiple
flight plans between the same origin and destination. When
other formats for the flight plan name are used, the pilot
fills in the origin and destination.
5
Enter ground speed at 1R when a speed other than the
one shown is required. The FMS shows the distance and
estimated time en route (ETE) for a direct flight from
Phoenix to Minneapolis. ETE is calculated based on the
ground speed (GS) at 1R. Distance and time are updated
as waypoints are added to the flight plan. The defaulted
ground speed is 120 knots (kts).
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 6- -6
KPHX- -KMSP FPL 1/1
01595.02
Navigation
6-7