Honeywell FMZ Series Pilot's Manual page 225

Flight management system fms for the agusta aw139/ab139 helicopter software version nz 7.1
Table of Contents

Advertisement

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step
Procedure 6- -8 FMS Manual Position Update by
5
Review difference between the FREEZE POSITION and
the reference position. Select either CLEAR (6L) or
ENTER (6R), as shown in Figure 6--53.
DETAILS -- The FMS calculates the difference between
ZUN and the FREEZE POSITION (FMS position when the
aircraft overflew ZUN). Figure 6--53 shows the FMS
position was 3.0 NM (1.3 NM South and 2.7 NM West)
from ZUN when the aircraft flew over the navaid.
At this point, one of two selections is made. When the
ENTER prompt is pushed, a 3 NM correction is added to
the present FMS position (1.3 NM North and 2.7 NM East).
This jumps the current FMS position (that is constantly
changing) 1.3 NM North and 2.7 NM East.
NOTE:
When the CLEAR prompt is selected, no correction is
applied to the FMS position.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Flyover
Figure 6- -53
FREEZE POSITION
This position update might not be apparent when FMS
position is currently based on GPS or radios.
00713.03
Navigation
6-67

Advertisement

Table of Contents
loading

Table of Contents