Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
RUNWAY POSITION (RW POS)
When a departure surface is selected and PERF is initiated, the prompt
RW POS at 6R is displayed on the ACTIVE FLT PLAN page. Once the
aircraft is at the surface threshold, the FMS is updated to the surface
threshold position.
NOTE:
This is an option as FMS position is equal to GPS position,
when installed.
Updates are made by pushing the line select key (6R) adjacent to the
RW POS prompt on the ACTIVE FLT PLAN page, as shown in
Figure 4--31. The POSITION INIT page is displayed when pushing the
RW POS prompt.
Operational Example
4-30
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 4- -31
ACTIVE FLIGHT PLAN 1/5 Page
A28- - 1146- - 181
REV 3 Mar 2009