Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
The DEPARTURE SURFACES 1/X page, shown in Figure 6--32, is
displayed when selecting the DEPARTURE function. From the
departure pages, the pilot selects a departure surface, SID, and
departure transition. Access to the DEPARTURE page from the
ACTIVE FLT PLAN page is available only when the origin waypoint is
an airport and the aircraft is within 50 NM of the origin and a DEST is
entered. Access to the DEPARTURE page is always available from the
NAV INDEX.
The default airport at 1L is the origin of the active flight plan. When the
origin is not defined or when the origin is not an airport or heliport,
prompts are displayed for entry of an airport. When the origin waypoint
is not an airport, access to SIDs is for review only. When the active flight
plan contains a SID, the selected departure surface, SID, and transition
are displayed.
Step
Procedure 6- -6 Departure Selection
1
Select DEPARTURE from the ACTIVE FLIGHT PLAN or
NAV INDEX.
2
Select the desired surface from the DEPARTURE
SURFACES page, shown in Figure 6--32. Runway 25 (4L)
is selected in this example.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 6- -32
DEPARTURE SURFACES 2/3
Navigation
6-37
Advertisement
Table of Contents
