Deleting Stored Flight Plans - Honeywell FMZ Series Pilot's Manual

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step Procedure 6- -1 Stored Flight Plans
6 Enter the route for the flight plan at the VIA.TO prompt.
The following cannot be used in stored flight plans:
Temporary waypoints
D
SIDs, STARs, or approach procedures
D
Alternate flight plan and destination
D
Speed or angle constraints
D
Another stored flight plan.
D
Stored flight plans contain patterns. When SPECIAL
7
MISSION, under FLIGHT CONFIG (configuration), is set
to ON, a larger selection of patterns is stored.
8 Close the flight plan by entering the destination waypoint
as the last waypoint in the flight plan. Entering the
destination waypoint as the last waypoint is done by line
selecting the destination from the right side of the page
and inserting the last waypoint on the left side of the page.

Deleting Stored Flight Plans

The DEL key is used to remove stored flight plans from the FMS
memory. Procedure 6--2 describes the method for deleting a stored
flight plan.
Step Procedure 6- -2 Deleting a Stored Flight Plan
1 Select FPL LIST from the NAV INDEX.
2 Push the DEL key (*DELETE* is displayed in the
scratchpad). Pushing the line select key adjacent to the
flight plan name erases the stored flight plan from the FMS
memory.
Navigation
6-8
Honeywell International Inc. Do not copy without express permission of Honeywell.
A28- - 1146- - 181
REV 3 Mar 2009