Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Position Sensor Deselection
To prevent the FMS from using a sensor for position computations,
follow the steps in Procedure 6--11.
Step
Procedure 6- -11 Position Sensor Deselection
1
Select POS SENSORS from the NAV INDEX.
2
Push the delete key (DEL). *DELETE* is displayed in the
scratchpad.
3
Push the left line select key on the SENSOR page next to
the sensor that is no longer used. DESEL is shown
adjacent to the sensor identifier and the U is removed
adjacent to the sensor position.
4
To reselect the deleted sensor, push the delete key and
*DELETE* is displayed in the scratchpad.
5
Push the left line select key next to the sensor that is to be
used. The DESEL adjacent to the sensor identifier is
deleted and the FMS can use the sensor.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Navigation
6-87
Advertisement
Table of Contents
