Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
MULTIPLE WAYPOINTS
When a waypoint identifier is entered on any page and the FMS finds
more than one definition for the identifier, the WAYPOINT SELECT
page is displayed. The pilot must choose which definition to use. When
inserting waypoints into a stored or active flight plan, the location
closest to the previous waypoint is shown at the top of the page. For all
other cases, the location closest to the aircraft position is shown at the
top of the page.
For example, when Thermal California (TRM) is entered on the DATA
BASE WPT page, the FMS shows all the TRM waypoints found on the
WAYPOINT SELECT page, as shown in Figure 6--30.
00629.05
Figure 6- -30
WAYPOINT SELECT 1/2
Pushing the line select key adjacent to the desired waypoint selects the
desired waypoint. When the RETURN prompt at 6R is pushed, no
waypoint is selected.
Pilot Defined Waypoints
When a pilot--defined waypoint is entered on the DATA BASE WPT
page, the FMS switches to the PILOT WAYPOINT page and shows the
waypoint, as well as the data about the waypoint.
A28- - 1146- - 181
Navigation
6-32
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Advertisement
Table of Contents
