Honeywell FMZ Series Pilot's Manual page 65

Flight management system fms for the agusta aw139/ab139 helicopter software version nz 7.1
Table of Contents

Advertisement

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
— PILOT RNP CANCEL -- This is an alerting system message
indicating the pilot--entered manual RNP is canceled.
— PILOT RNP CANCEL NEXT WP -- This is an alerting system
message indicating the next flight plan leg has a smaller RNP
than the current pilot--entered manual RNP.
— RADIALS DO NOT INTERSECT -- This is an advisory operator
message indicating the radials defined for the intercept function
do not cross.
— RAIM WILL EXCEED LIMIT -- This is an alerting system
message indicating the GPS RAIM is going to exceed approach
limits.
— RE--LOGON TO ATC CENTER -- This is an alerting system
message indicating an ATC logon message was sent from the
aircraft and ATC did not respond within the required time.
— REQUESTED DATA NOT RCVD -- This is an advisory system
message indicating the FMS has timed out while waiting for the
requested data to be received from the datalink.
— RESET ALT SEL? -- This is an alerting system message
indicating the FMS is commanding a new altitude but the altitude
selector has not been reset. The aircraft does not make altitude
changes until the selector has been reset.
— RUNWAY NOT FOUND -- This is an advisory operator message
indicating the database does not contain the entered runway at
the designated airport.
— SINGLE OPERATION -- This is an alerting system message
indicating a problem between the two FMSs, which precludes full
communication between the two systems.
— SINGLE/INDEPENDENT REQD -- This is an advisory operator
message indicating the operating mode needs to be single or
independent before the CLEAR FILES page is accessed.
— STORED FPL PERF UNAVAIL -- This is an alerting system
message indicating a numerical fault in the stored flight plan
predictions.
— TEMP COMP CANCELED -- This is an alerting system message
indicating the temperature compensation mode has been
canceled.
System Components
3-24
Honeywell International Inc. Do not copy without express permission of Honeywell.
A28- - 1146- - 181
REV 3 Mar 2009

Advertisement

Table of Contents
loading

Table of Contents