Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step
Procedure 6- -18 Holding at Present Position
5
The HOLDING PATTERN page with *PPOS as the holding
fix is displayed. Make any necessary changes.
Holding at the present position can only be done when
LNAV is captured and the cross--track error is less than
0.25 NM.
6
Select ACTIVATE (6R) or CLEAR (6L).
DELETING A HOLDING PATTERN
Once a holding pattern has been defined and activated, deleting the
holding pattern before crossing the holding fix is possible. Deleting the
holding pattern is done by deleting the pattern from the ACTIVE
FLIGHT PLAN page or from the HOLDING PATTERN page.
To delete the holding pattern from the ACTIVE FLT PLAN page, follow
Procedure 6--19. Refer to Procedure 6--20 for deleting holding pattern
from the HOLDING PATTERN page.
Step
Procedure 6- -19 Deleting a Holding Pattern From the
1
Display the active flight plan page showing the holding fix
waypoint.
2
Push the DEL key. *DELETE* is displayed in the
scratchpad.
3
Push the line select key to the left of the waypoint with
reverse video of H. This deletes the HOLD but not the
waypoint. A second *DELETE* deletes the waypoint.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Active Flight Plan Pages
Navigation
6-117
Advertisement
Table of Contents
