Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Storing of Active Flight Plan -- The active flight plan is permitted
D
to be stored in memory for future use. This is done at any point
during entry of the active flight plan. A prompt is shown below the
destination at 5R, as shown in Figure 7--11. Entering the flight plan
identifier results in the FMS displaying the pages to modify on the
stored flight plan .
— The saved active flight plan must follow the same rules that apply
to stored flight plans. These rules are as follows:
1. All terminal procedures, temporary waypoints, heading select,
and intercept legs are permitted to be removed from the active
flight plan prior to being stored.
2. Saving the active flight plan is only conducted when the aircraft
is on the ground. The prompt is removed once the aircraft
becomes airborne.
3. Each stored flight plan is required to have a unique name. While
attempting to save the active flight plan, when one already exists
with the same name, the scratchpad message DUPLICATE FLT
PLAN NAME is displayed. When this occurs, the active flight
plan is not stored.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 7- -11
Prompt Below Destination
01107.01
Flight Plan
7-21
Advertisement
Table of Contents
