Honeywell FMZ Series Pilot's Manual page 490

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Code Error Title
2A COMMAND IN
WORK
2B UNKNOWN OP
CODE
2C DISK ERROR
DURING READ
2D DISK ERROR
DURING WRITE
2E DISK WRITE
PROTECTED
2F DISK IS FULL
30 WRITE CMD NO
RESPONSE
31 CLOSE CMD NO
RESPONSE
32 STATUS CMD
ILLEGAL VALUE
33 DEBUG
MONITOR NO
RESPONSE
34 DISK IS NOT
FORMATTED
35 FORMAT CMD
NO RESPONSE
36 DATALOADER
UPDATE NEEDED
37 ILLEGAL CHARS
IN READ BUFFER
38 PREV READ
BUFFER
OVERFLOW
Maintenance
12-4
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 12- -1 (cont)
Data Loader Fault Codes
Internal status command from data
loader -- must not be seen by an
operator.
An illegal command was sent to the
data loader.
A disk read error was encountered.
Check the disk for errors and try
another disk in the data loader.
See 2C
The write protect tab on the disk is
preventing the data loader from
writing to the disk.
There is no more free space on the
disk for writing data files.
The data loader is not responding to
the FMS write request.
The data loader is not responding to
the FMS open file command.
The data loader sent an undecodable
status response to the FMS.
Unused
The inserted disk is not formatted
correctly.
The data loader did not respond to
the FMS format disk command.
An FMS operation requires a newer
data loader.
Unused
Internal software error (buffer
overflowed) -- probably a software
error.
Description
A28- - 1146- - 181
REV 3 Mar 2009