Engineering Data - Honeywell FMZ Series Pilot's Manual

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step Procedure 6- -34 Flight Configuration Setup
12 When temperature compensation is disabled, OFF is
displayed under TEMPERATURE COMP CONFIG and no
prompt is available in 3R. When temperature
compensation is enabled, an OR prompt is available in
3R, as shown in Figure 6--140. Operation of the
temperature compensation feature is discussed on
page 7-30.

Engineering Data

The ENGINEER DATA page, shown in Figure 6--142, is accessed
using 2R on the FMS SETUP page. The ENGINEER DATA page shows
the index of available options primarily used under the direction of
Honeywell engineering in finding and solving problems with the FMS.
The ENGINEERING DATA 1/1 page is used in selecting various
functions. For each function, additional pages are displayed.
1L -- DEBUG is used to upload and download diagnostic information
D
using the data loader. DEBUG is also used to format a disk.
1R -- NT (NAVAID TUNING) DATA shows pages of information
D
about each navaid that permits tuning. These are display--only
pages and no input is permitted.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 6- -142
ENGINEER DATA 1/1 Page
00768.08
Navigation
6-191