Honeywell FMZ Series Pilot's Manual page 151

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
1L -- The slope of the takeoff runway is displayed. When no surface
D
has been selected, entry prompts are displayed. The width of the
surface is displayed when a surface has been selected. When the
takeoff surface is a helipad, this line is blank. No entry is permitted.
1R -- The threshold of the takeoff runway is displayed. When no
D
surface has been selected, entry prompts are displayed. When the
takeoff surface is a helipad, this line is blank.
2L -- The stopway of the takeoff runway is displayed. When no
D
surface has been selected, entry prompts are displayed. When the
takeoff surface is a helipad, this line is blank.
2R -- Head/tailwind and crosswind resolved by the takeoff runway
D
heading and the runway wind entry are displayed. When the takeoff
surface is a helipad, this line is blank.
3L -- Density altitude computed from the pressure altitude and the
D
surface temperature is displayed.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 5- -17
TAKEOFF 2/2 Page
Performance
5-31