Honeywell FMZ Series Pilot's Manual page 95

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
PROCEDURE -- At this point, the departure selection is complete
D
and the flight crew can either REVIEW or ACTIVATE the SID, as
shown in Figure 4--27. ACTIVATE (6R) inserts the runway and
procedure into the active flight plan. The SID contains both the
lateral waypoints and any vertical constraints for the procedure
contained in the database.
— Flight Plan Discontinuities -- When a discontinuity occurs in a
flight plan while adding a SID or STAR, the discontinuity is
caused by the lack of a common point between the flight plan and
the inserted SID or STAR. The discontinuity is removed by one
of the two following methods:
1. Pushing the DEL key and the adjacent line select key to
delete the discontinuity.
2. Moving any waypoint into the line where the discontinuity is
located.
Operational Example
4-26
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 4- -27
PROCEDURE 1/1
00662.07
A28- - 1146- - 181
REV 3 Mar 2009