Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step
Procedure 6- -17 Holding Pattern Definitions and
5
Review the displayed default holding pattern definition, as
shown in Figure 6--90. When no changes are required, go
to step 11. Make changes, as necessary, using the
required steps.
DETAILS -- The default holding is a standard holding
pattern at the designated holding fix with the inbound
course set to the flight plan course into the holding fix. Leg
times are defaulted to 1 min.
6
Enter any inbound course and/or turn direction and push
line select 3L. The entry is made by entering the course
followed by a slash (/) and then an L or R into the
scratchpad. To adjust only the inbound course, enter the
course into the scratchpad. To adjust only the turn
direction, enter a slash (/) followed by an L or R.
Navigation
6-112
Honeywell International Inc. Do not copy without express permission of Honeywell.
Review
Figure 6- -90
Holding Pattern Definition
00739.07
A28- - 1146- - 181
REV 3 Mar 2009
Advertisement
Table of Contents
