Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Entry
Airway
Alternate Destination
Altitude (any altitude
entry)
Multifunction Control Display Unit (MCDU) Entry Format
10-2
Honeywell International Inc. Do not copy without express permission of Honeywell.
Table 10- -1 (cont)
MCDU Entry Format
Entry format is either start.airway.end
D
or airway.end
Where:
Start = entry waypoint onto airway
Airway = airway name
End = exit waypoint of airway
When format airway.end is used, the
D
entry waypoint onto airway must be in
active flight plan and airway must be
inserted into active flight plan following
the waypoint
Airway is always followed by a decimal
D
point
Entering an airway into the active flight
D
plan when the entry and exit waypoint
are adjacent waypoints in the flight
plan is permitted. Enter the airway into
the scratchpad (followed by a decimal
point) and place the airway after the
entry waypoint in the active flight plan.
The name is from one to five
D
alphanumeric characters
First character cannot be a dash (--).
D
Limited to certified ceiling when aircraft
D
database (ACDB) is valid
Entry in feet up to five digits
D
Entry in flight levels (FL)
D
Negative altitude permitted
D
Automatic conversion to flight levels
D
above transition altitude
Range from FL000 to FL600, from
D
--1300 to 60,000 feet.
Format
A28- - 1146- - 181
REV 3 Mar 2009
Advertisement
Table of Contents
