Departure Selection - Honeywell FMZ Series Pilot's Manual

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

DEPARTURE SELECTION

Departure selection is entered by selecting the DEPARTURE prompt
on the ACTIVE FLT PLAN page. Departure selection is completed
using four pages.
DEPARTURE SURFACES - -The DEPARTURE SURFACES page,
D
shown in Figure 4--24, is displayed by pushing the DEPARTURE
prompt on the ACTIVE FLT PLAN page. The available surfaces for
the origin airport are displayed. In this example, surface 13L is
selected with line select key 2L.
The DEPARTURE prompt is selected after the CONFIRM INIT on
PERF INIT page by the following:
- - Pushing the FPL function key for the ACTIVE FLT
PLAN page 1.
- - Selecting the DEPARTURE prompt (6L) on the ACTIVE FLT
PLAN page 1.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 4- -24
DEPARTURE SURFACES 1/2
02134.02
Operational Example
4-23