Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
EXITING A HOLDING PATTERN
The EXIT prompt is used to exit the holding pattern. This prompt is
displayed on the ACTIVE FLT PLAN page.
One minute before the holding fix, the ACTIVE FLT PLAN page displays
the EXIT prompt, as shown in Figure 6--95. When selected before the
holding fix is crossed, the holding pattern is deleted from the flight plan.
00741.06
Figure 6- -95
Exiting a Holding Pattern
After crossing the holding fix, when the EXIT prompt is selected, the
aircraft turns back to the holding fix, crosses the fix, and continues with
the flight plan.
Once the FMS starts holding at the fix and the EXIT prompt has been
selected, the prompt is changed to RESUME HOLD, as shown in
Figure 6--96, on the ACTIVE FLT PLAN page. When RESUME HOLD
is selected, the FMS continues to the holding fix and then resumes the
holding pattern.
A28- - 1146- - 181
Navigation
REV 3 Mar 2009
6-119
Honeywell International Inc. Do not copy without express permission of Honeywell.
Advertisement
Table of Contents
