Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Wind and Temperature Pages
Selecting the W/T prompt for a specific waypoint on the PERF PLAN
page shows the WIND/TEMP page. Entry of wind and temperature
information is permitted on this page.
When the WIND/TEMP 2/X page is first selected, the predicted altitude
as well as the predicted wind and temperature at that altitude for the
waypoint is displayed, as shown in Figure 5--14.
1L -- The waypoint is displayed. No entry is permitted. However, the
D
PREV and NEXT keys are used to cycle through the waypoints in
the flight plan.
1R -- Pushing this line select key returns the display to the PERF
D
PLAN page.
2L -- The predicted altitude from the performance computations is
D
displayed here. Altitude entries are permitted. Altitude entries are
used to assign an altitude to an entered wind and/or temperature.
2R -- The wind displayed is the wind used for performance
D
computation. This wind is a blend of sensed wind (when airborne)
and entered winds. Wind entries in degrees (true and magnitude)
are entered.
3R -- The predicted static air temperature is a blend of sensed and
D
entered values. Temperature is entered in degrees Celsius (_C).
Performance
5-24
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 5- -14
WIND/TEMP 2/X
00564.07
A28- - 1146- - 181
REV 3 Mar 2009
Advertisement
Table of Contents
