Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
LANDING
The ACTIVE FLT PLAN page is displayed when activating the arrival.
The LANDING page is accessed from PERF INDEX by pushing
LANDING prompt (2R).
LANDING 1/2 -- The LANDING 1/2 page is displayed in Figure 4--48.
D
The following is displayed on the LANDING page:
— Surface identifier (1L)
— Surface heading (1L)
— Runway length or helipad dimensions (1R)
— Temperature (2L)
— Surface wind (2R)
— Pressure altitude/barometric (BARO) setting (3L)
— Surface elevation (3R).
Surface information is retrieved from the database. For landing,
both surface temperature and wind are required entries for landing
calculations. Barometric setting is a pilot--entered value, air data
computer (ADC) value, or default of 29.92 and is used to calculate
the pressure altitude for the surface elevation.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 4- -48
LANDING 1/2
Operational Example
4-47
Advertisement
Table of Contents
