Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step
Procedure 6- -34 Flight Configuration Setup
8
Review the current configuration, as shown in
Figure 6--140. Make changes, as necessary, using the
required steps.
9
Set FUNCTION KEY PAGING to ON or OFF at 2R. When
ON, function pages are advanced by pushing the function
key instead of the NEXT key.
DETAILS
FUNCTION KEY PAGING OFF -- Each push of a function
D
key (PERF, NAV, FPL, PROG, DIR) results in the first page
of the function being displayed. This is the default
configuration.
FUNCTION KEY PAGING ON -- Each push of a function
D
key results in the MCDU displaying the next page of the
function when the current function is being displayed.
For example, assume FUNCTION KEY PAGING is ON
and ACTIVE FLT PLAN page 3 of 10 is displayed. When
the FPL key is pushed again, page 4 of 10 is displayed.
A28- - 1146- - 181
REV 3 Mar 2009
Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 6- -140
FLIGHT CONFIG 2/2
00764.15
Navigation
6-189
Advertisement
Table of Contents
