Honeywell FMZ Series Pilot's Manual page 398

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
Step Procedure 7- -2 FMS Temperature Compensation
5 3L indicates the current temperature compensation mode
(cont) is COLD and the pilot changes the temperature
compensation mode by selecting 3R.
apm: temp; options: temporarily disable
CDU -- When selected ON, the FLIGHT SUMMARY page
D
is automatically displayed 15 seconds following landing.
apm: temp; options: temporarily enable
apm: temp; options: temporarily disable
Loader -- When selected ON, the FLIGHT SUMMARY
D
page data is automatically saved 15 seconds following
landing. The file saved to disk uses the following naming
convention:
FS#HHMM.TXT
Where: FS = Flight Summary
The FMS posts error messages when the FMS is
configured to output the FLIGHT SUMMARY data, but is
unable to communicate to the loader.
All
Multiple ON selections are permitted. The default
configuration is OFF for all options.
6 Selecting 3R changes the temperature compensation
mode by displaying the TEMP COMP CONFIG page,
shown in Figure 7--13.
Flight Plan
7-32
Honeywell International Inc. Do not copy without express permission of Honeywell.
Configuration
# = FMS side (1 = left, 2 = right, 3 = Center)
hh = hour
mm = minute
A28- - 1146- - 181
REV 3 Mar 2009