Table of Contents
Advertisement
Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter
6R -- When the pilot enters a manual override RNP value, selection
D
of the YES prompt accepts the entered value as the new manual
override RNP value. Otherwise, this line gives access to
PROGRESS page 2.
NOTE:
When a MANUAL RNP entry or an overriding RNP entry to
the default phase of flight RNP is made on the non--coupled
side and INDEPENDENT mode is selected on the FMS, the
RNP does not transfer to the coupled FMS when the operator
selects the mode back to DUAL. Entering a MANUAL RNP
or an overriding RNP while in DUAL mode permits the
entered RNP to transfer to the coupled FMS.
Progress
8-10
Honeywell International Inc. Do not copy without express permission of Honeywell.
A28- - 1146- - 181
REV 3 Mar 2009
Advertisement
Table of Contents
